Rapid tooling · Trial parts · Production handoff[email protected]+86 176 2030 0785
PROTOTYPE TOOLING
Project enquiries+86 176 2030 0785

Plastic part DFM before tooling

Flag molding-sensitive geometry before the tool is made, including ribs, bosses, snap fits and surfaces that must stay clean.

Terminal with screw-mounted housing
AI application illustration

Review areas that affect tooling

Flag ribs, bosses, snap fits and features that may need a different parting direction. Review permissible gate, parting-line and ejector marks together with the intended surface finish.

Record decisions before sampling

Mark accepted changes on a controlled drawing and keep open issues visible. Define which changes must be checked on the first molded sample and which can be resolved through assembly review.

Define the part and its mating pieces

Provide the latest CAD for the molded part and any component that locates, seals or fastens to it. Mark which features control assembly and which surfaces customers will see.

Application reference

Protolabs tooling reference

Frequently asked questions

Can I start with a 3D file and no final material?

Yes. Include the part's intended use and any material candidates. Material selection can affect the geometry and the sampling plan, so record it as an open decision.

What is the output of a design review?

Agree on the geometry to carry forward, unresolved tooling questions and the criteria to verify on samples. The scope is defined for the individual project.

Review interchangeable mold inserts → · 3D-Printed Prototype vs. Rapid Injection Tooling →

PROTOTYPE TOOLING

Discuss your drawing with OPINOX.

Latest CAD revision and mating-part drawings

Discuss your project ↗
Ask about your project ↗