Rapid tooling · Trial parts · Production handoff[email protected]+86 176 2030 0785
PROTOTYPE TOOLING
Project enquiries+86 176 2030 0785

AI application illustration

Undercut review for a barbed snap clip

Assess how a barbed snap clip assembles and releases from a mold, with the hook, retention feature and mating hole marked.

Barbed cable-retention assembly
AI application illustration
Barbed cable-retention assembly close-up
Close-up of the finished-product concept

Draw both directions

Show the direction the clip enters the mating hole and the expected tool pull. A retaining barb that works in use can still obstruct the mold’s opening direction.

Assess how the clip can be formed

Discuss whether draft, an accessible shut-off, side action or design adjustment is feasible for the intended resin and hook geometry. Record which surfaces must remain available for retention.

Technical reference · Protolabs guide to undercuts and part release

Prepare your quote request

  • Clip and receiving-hole cross sections
  • Install and removal sequence
  • Target retention and appearance zones
Get a Quote ↗

Buyer questions

Can the hook release by flexing?

Review the resin, geometry and allowable strain before relying on a flexible release.

Is the visible line always at the same location?

The line depends on the mold split and any shut-off or moving feature. Review it on the proposed tooling layout.

Plastic part DFM before tooling →

Ask about your project ↗