Rapid tooling · Trial parts · Production handoff[email protected]+86 176 2030 0785
PROTOTYPE TOOLING
Project enquiries+86 176 2030 0785

AI application illustration

Translucent injection-molded color discs

Compare translucent color samples with matched thickness, backing and illumination, then confirm the appearance on the intended part.

Desktop clock with tinted disc
AI application illustration
Desktop clock with tinted disc close-up
Close-up of the finished-product concept

Set the light and backing

Decide whether the part is judged with backlighting, with a specified backing or in ambient light. Use the same conditions across sample rounds and record the reference sample.

Compare on representative thickness

A disc provides a starting reference for color. Check the target wall thickness and viewing geometry on the molded part if the product uses ribs, contours or light sources behind the material.

Technical reference · Protolabs guide to cosmetic appearance on molded parts

Prepare your quote request

  • Target resin grade and wall thickness
  • Color master or approved sample
  • Backing, illumination and viewing condition
Get a Quote ↗

Buyer questions

Can a screen image serve as the color master?

Use a physical master or a defined measurement method for repeatable acceptance.

Should lit and unlit appearance both be checked?

List both conditions when each matters to product appearance.

Molded color and surface finish samples →

Ask about your project ↗